Hobby-Lobby
PILOT-1 GILMORE RED LION 1/4 ARF RC PLANE (OVERSIZE)
| Gross Weight | 3892 lb |
| Empty Weight | 2492 lb |
| Span | 26 ft 2 in |
| Length (overall) | 21 ft 3 in |
| Max Speed | 304.98 mph |
| Price | $50,000 |
| Year of Introduction | 1932 |
| NR536V | - #92 |
| NR61Y | - #121, #57, #2 |
| NR278V | - #44, #91 |
* Notice:, The two HUGE boxes that this product comes in makes it an Oversize Shipment that has to be delivered by Truck Freight. The additional shipping charge is $250.00. This product is NOT available for shipment outside of the United States and Canada., Production:4, NR54Y:, - Crashed in Testing, Technical Specifications:, Length:, 69-1/2", Wingspan:, 84-1/4", Flying Weight:, 21 lbs., Wing Area:, 1254 sq. in.,
Authentic 1/4 scale racing classic for electric or gas 84-1/4" ...Hobby-Lobby
HS-5485HB DIGITAL SERVO
| Applications | Heli's and Aircraft up to 72" or up to 12lbs when using just one servo per control surface. |
| Warning | Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail. |
| *** Warning | Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail. |
| Size Category | Standard |
| Type | Digital |
| Weight | 1.59 oz |
| Bushing Or Bearing | Bearing |
| Bearing | Single |
| Motor Type | 3-Pole |
| Gear Type | Metal |
| Gear Material | Karbonite |
Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs., Hitec HS-5485HB Digital Servo Highlights:, Programmable Digital Circuit, Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs., Technical Specifications:, Hitec HS-5485HB Digital Servo Specs:, Torque:, 72 oz/in @ 4.8V, 89 oz/in 6V, Speed:, .20 sec/60 deg @ 4.8V, 0.17 sec/60 deg @ 6V,
HS-5485HB Digital Servo The HS-5455HB is an excellent choice for ...Hobby-Lobby
6 FOOT TELEMASTER ELECTRO ARF V2 (OVERSIZE)
73-1/4 in. wingspan, 53-1/2 in. long, 848 sq. in. wing area, 88 oz. flying weight, 15 oz. per sq. ft. wing loading. Hundreds of modelers have had their first successful flying experience with a Telemaster, and many beginners have successfully flown a Telemaster 40 without assistance. Version 2 is new and improved, but with the same flying character you've come to love. It's now covered in opaque genuine Oracover, and the flaps are pre-cut and slotted with hinges. The construction quality has been improved and it's still set up for AXI OUTRUNNER power and the access hatch for the battery has a magnetic latch to make it really easy to swap out packs. An illustrated instruction manual is included showing how to assemble the model which will take about 6-8 hours to complete. For 5 channels: Ailerons (2 servos) Flaps (2 servos), Elevator, Rudder and Throttle.,
A classic that will quickly become your favorite plane "Learn ...Hobby-Lobby
SUPER CUB DSM RTF
| Wingspan | 47.7 in (1200mm) |
| Overall Length | 32.5 in (825mm) |
| Flying Weight | 25.2 oz (715g) |
| Prop Size | 9 x 6 |
| Elevator | Proportional |
| Rudder | Proportional |
| Throttle | Proportional |
| X-Port | Yes |
| Anti-Crash Technology | Yes |
| Landing Gear | Yes |
| Steering | Yes |
| Minimum Age Recommendation | 14 years |
| Assembly Time | Less than 1 Hour |
Super Cub DSM RTF Highlights:, Spektrum DX4e 4-Channel 2.4GHz DSMX transmitter, Technical Specifications:, Super Cub DSM RTF Specs:, Motor Size:, 480-sized brushed (installed), Servos:, 3W Mini Short Lead Mini Servos, Trim Scheme Colors:, White, blue, and black, Recommended Battery:, 3S 11.1V 1300mAh Li-Po (included), Aileron:No, Flaps:No, Retracts:No, Charger:, DC powered 3S Li-Po balancing charger, Experience Level:, No Experience Necessary,
A Great Way to Learn Flying Now Comes with the ...Hobby-Lobby
SPEKTRUM DX8 8CH TRANSMITTER W/AR8000
| Modulation | DSM2 |
| Band | 2.4GHz |
| Receiver | AR8000 |
| Programming Features | Airplane and Heli |
DX8 8Ch Transmitter w/AR8000 Highlights:, High-speed 11ms frame rate with 2048 resolution, Technical Specifications:, DX8 8Ch Transmitter w/AR8000 Specs:, Number of Channels, Model Memory:30, Modes:, Selectable 1, 2, 3 or 4,
Spektrum DX8 8Ch Transmitter w/AR8001 Combining Spektrum industry-leading 2.4GHz DSM ...Hobby-Lobby
SENIOR TELEMASTER PLUS (OVERSIZE)
This all-new version is covered in genuine Oracover, has built in flaps, quality construction and hardware, and even comes with a camera mounting cover. With the flaps down it will almost hover in a 10MPH wind. Takeoffs and landings are easy and majestic. Swapping batteries or checking your fuel tank is easy with the large magnetic access hatch on top of the fuselage. An illustrated instruction manual is included showing how to assemble the model which will take about 6-8 hours to complete. For 5 channels: Ailerons (2 servos) Flaps (2 servos), Elevator, Rudder and Throttle., Technical Specifications:, Length:, 64", Wingspan:, 94", Flying Weight:, 9 lbs., Controls:, Aileron,Flaps,Rudder, Elevator, Throttle, Wing Area:, 1330 sq. in.,
New Design, More Features, Same Telemaster Style Drop Box for ...Hobby-Lobby
ULTRACOTE PARKLITE WHITE
| If you need help, visit our UltraCote instructions page. Specs | Length |
| Width | 23.5 in. |
| Weight | 1.07 oz. per square foot |
| Application Temperatures | Adhesive activation |
At 200 degrees the adhesive on ParkLite becomes active, allowing the covering to be attached to the model. While 200 degrees will fully bond the to the model, it is well below the temperature that causes ParkLite to shrink. This is exactly what's needed when first attaching covering to the model to prevent the covering from distorting. Shrink Onset temperature - 280 degrees F, At 280 degree F ParkLite begins to shrink. This is called the shrink onset point. After the covering is attached using an iron set to 200 degrees F, the next step is to shrink the covering. This initial shrinking is done with the iron set at 280 degrees F. Maximum Shrinkage Temperature - 350 degrees F, At 350 degrees F, ParkLite reaches it's maximum shrinking point. Raising the temperature above this will not cause it to shrink more. This covering is not suitable for foam models because of the high shrinkage temperature., Please read the instructions included with each roll of ParkLite for the complete application instructions and pro-user tips., ,
UltraCote Parklite White Hangar 9 is bringing its UltraCote® line ...Hobby-Lobby
ULTRACOTE PARKLITE ORANGE
| If you need help, visit our UltraCote instructions page. Specs | Length |
| Width | 23.5 in. |
| Weight | 1.07 oz. per square foot |
| Application Temperatures | Adhesive activation |
At 200 degrees the adhesive on ParkLite becomes active, allowing the covering to be attached to the model. While 200 degrees will fully bond the to the model, it is well below the temperature that causes ParkLite to shrink. This is exactly what's needed when first attaching covering to the model to prevent the covering from distorting. Shrink Onset temperature - 280 degrees F, At 280 degree F ParkLite begins to shrink. This is called the shrink onset point. After the covering is attached using an iron set to 200 degrees F, the next step is to shrink the covering. This initial shrinking is done with the iron set at 280 degrees F. Maximum Shrinkage Temperature - 350 degrees F, At 350 degrees F, ParkLite reaches it's maximum shrinking point. Raising the temperature above this will not cause it to shrink more. This covering is not suitable for foam models because of the high shrinkage temperature., Please read the instructions included with each roll of ParkLite for the complete application instructions and pro-user tips., ,
UltraCote ParkLite Orange Hangar 9 is bringing its UltraCote® line ...Hobby-Lobby
ULTRACOTE PARKLITE OLIVE DRAB
| If you need help, visit our UltraCote instructions page. Specs | Length |
| Width | 23.5 in. |
| Weight | 1.07 oz. per square foot |
| Application Temperatures | Adhesive activation |
At 200 degrees the adhesive on ParkLite becomes active, allowing the covering to be attached to the model. While 200 degrees will fully bond the to the model, it is well below the temperature that causes ParkLite to shrink. This is exactly what's needed when first attaching covering to the model to prevent the covering from distorting. Shrink Onset temperature - 280 degrees F, At 280 degree F ParkLite begins to shrink. This is called the shrink onset point. After the covering is attached using an iron set to 200 degrees F, the next step is to shrink the covering. This initial shrinking is done with the iron set at 280 degrees F. Maximum Shrinkage Temperature - 350 degrees F, At 350 degrees F, ParkLite reaches it's maximum shrinking point. Raising the temperature above this will not cause it to shrink more. This covering is not suitable for foam models because of the high shrinkage temperature., Please read the instructions included with each roll of ParkLite for the complete application instructions and pro-user tips., ,
UltraCote ParkLite Olive Drab Hangar 9 is bringing its UltraCote® ...Hobby-Lobby
ULTRACOTE PARKLITE DEEP RED
| If you need help, visit our UltraCote instructions page. Specs | Length |
| Width | 23.5 in. |
| Weight | 1.07 oz. per square foot |
| Application Temperatures | Adhesive activation |
At 200 degrees the adhesive on ParkLite becomes active, allowing the covering to be attached to the model. While 200 degrees will fully bond the to the model, it is well below the temperature that causes ParkLite to shrink. This is exactly what's needed when first attaching covering to the model to prevent the covering from distorting. Shrink Onset temperature - 280 degrees F, At 280 degree F ParkLite begins to shrink. This is called the shrink onset point. After the covering is attached using an iron set to 200 degrees F, the next step is to shrink the covering. This initial shrinking is done with the iron set at 280 degrees F. Maximum Shrinkage Temperature - 350 degrees F, At 350 degrees F, ParkLite reaches it's maximum shrinking point. Raising the temperature above this will not cause it to shrink more. This covering is not suitable for foam models because of the high shrinkage temperature., Please read the instructions included with each roll of ParkLite for the complete application instructions and pro-user tips., ,
UltraCote ParkLite Deep Red Hangar 9 is bringing its UltraCote® ...Hobby-Lobby
ULTRACOTE APPLE GREEN
UltraCote Apple Green Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. If you need help, visit our UltraCote instructions page. UltraCote Highlights: High tech polyester covering Unique multi temperature-controlled adhesive shrinkage system Versatile and easy to apply Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model. Fuel proof to glow fuel, gas, and smoke oil. Water proof as well. Specs: Length: 1.98 meters (78") Width: 23.5 in. Weight: 3 oz. per square foot, ,
UltraCote Apple Green Hangar 9 UltraCote is a high tech ...Hobby-Lobby
DIGITAL HI-VOLT, HI-TORQUE HS-5685MH: UNIVERSAL SERVO
| Digital Hi-Volt, Hi-Torque HS-5685MH | Universal Servo |
| Digital Hi-Volt, Hi-Torque HS-5685MH | Universal Highlights |
| Digital Hi-Volt, Hi-Torque HS-5685MH | Universal Specs |
| Type | Digital |
| Length | 1.6 in (40.6mm) |
| Width | 0.8 in (19.8mm) |
| Height | 1.5 in (37.8mm) |
| Weight | 2.1 oz (60g) |
| Bushing Or Bearing | Bearing |
| Bearing | Dual |
| Motor Type | 3-pole ferrite |
| Connector Type | Universal |
| Gear Type | Metal |
| Voltage | 6.0V - 7.4V |
Programmable Features Include: Dead Band Width, Direction of Rotation, Speed of Rotation (slower), End Points, Neutral Points, Fail Safe On/Off, Fail Safe Point, Programmable Digital Circuit, Technical Specifications:, Application:, 1/10 to 1/8 scale vehicles, large sport helis, up to 25% scale aerobatic aircraft, Torque:, 157 oz-in (11.3kg-cm) @ 6.0V; 179 oz-in (12.9kg-cm) @ 7.4V, Speed:, 0.20 sec/60° @ 6.0V; 0.17 sec/60° @ 7.4V,
The HS-5685MH High Torque HV Metal Gear servo was designed ...Hobby-Lobby
DIGITAL HI-VOLT, HI-SPEED HS-5665MH: UNIVERSAL SERVO
| Digital Hi-Volt, Hi-Speed HS-5665MH | Universal Servo |
| Digital Hi-Volt, Hi-Speed HS-5665MH | Universal Servo Highlights |
| Digital Hi-Volt, Hi-Speed HS-5665MH | Universal Servo Specs |
| Type | Digital |
| Length | 1.6 in (41mm) |
| Width | 0.8 in (20mm) |
| Height | 1.5 in (38mm) |
| Weight | 2.1 oz (60g) |
| Bushing Or Bearing | Bearing |
| Bearing | Dual |
| Motor Type | 3-pole ferrite |
| Connector Type | Universal |
| Gear Type | Metal |
| Voltage | 6.0V - 7.4V |
Programmable Features Include: Dead Band Width, Direction of Rotation, Speed of Rotation (slower), End Points, Neutral Points, Fail Safe On/Off, Fail Safe Point, Programmable Digital Circuit, Technical Specifications:, Application:, 1/10 to 1/8 scale vehicles, larger sport helis, up to 25% scale aerobatic aircraft, Torque:, 122 oz-in (8.8kg-cm) @ 6.0V; 139 oz-in (10.0kg-cm) @ 7.4V, Speed:, 0.16 sec/60° @ 6.0V; 0.14 sec/60° @ 7.4V,
The HS-5665MH High Speed HV Metal Gear servo was designed ...Hobby-Lobby
S6010 DIGITAL SURFACE SERVO
| Size Category | Standard |
| Type | Digital |
| Application | 1/10-scale vehicles |
| Length | 1.6 in (41mm) |
| Width | 0.8 in (20mm) |
| Height | 1.5 in (39mm) |
| Weight | 1.7 oz (49.0 g) |
| Bushing Or Bearing | Bearing |
| Bearing | Dual |
| Motor Type | Brushed |
| Connector Type | Z-connector |
| Gear Type | Metal |
S6010 Digital Surface Servo Highlights:, 100 oz-in of torque at 6V provides impressive performance in demanding applications, Technical Specifications:, S6010 Digital Surface Servo Specs:, Torque:, 100 oz-in (7.2 kg-cm) @ 6V, Speed:, 0.14 sec/60 degrees @ 6V, Gear Material:, Metal with one plastic, Voltage:, 4.8 or 6.0V (4 or 5 cell),
Impressive torque and a hybrid gear train provide optimum performance ...Hobby-Lobby
MP80G BRUSHLESS ULTRA SPEED TAIL ROTOR SX 4.8V
| Flybarless Gyro Settings - Servo Frequency | 333Hz, Neutral Impulse |
| Size Category | Standard |
| Type | Digital |
| Torque | 48 oz/in @4.8V |
| Length | 1.59 inches |
| Width | .83 inches |
| Height | 1.57 inches |
| Weight | 2.25 oz |
| Motor Type | Brushless |
| Gear Type | Nylon |
| Voltage | 4.8V |
MP80G Brushless Ultra Speed Tail Rotor Sx 4.8V Highlights:, Brushless motor for the highest resolution possible, Tech Notes:, Technical Specifications:, MP80G Brushless Ultra Speed Tail Rotor Sx 4.8V Specs:, Application:, .50 to .90-size heli tail rotor gyro servo, Speed:, .05 sec/60-degrees @4.8V, Dimensions (WxLxH):, .83 x 1.59 x 1.57 in, Connector Type:JR, Deadband:, Zero deadband for ultra precision and performance,
MP80G Brushless Ultra Speed Tail Rotor Sx 4.8V The JR® ...